Garage door springs are an essential component of your garage door system. They support the weight of the door and make it easy to open and close. However, garage door springs can break or wear out over time, causing your door to malfunction. If you’re in Layton UT and need to fix a garage door spring, here’s a step-by-step guide to help you.

Step 1: Identify the Problem

Before attempting to fix your garage door spring, you need to identify the problem. Common signs of a broken or worn-out garage door spring include:

• The garage door won’t open or close
• The garage door is sagging on one side
• You hear a loud noise when opening or closing the garage door

If you notice any of these signs, you likely have a broken or worn-out garage door spring.

Step 2: Gather the Required Tools

To fix a garage door spring, you’ll need the following tools:

• A ladder
• A set of wrenches
• Safety glasses
• A replacement spring (if needed)
• A winding bar
• A cable puller
• A pair of pliers

Step 3: Release the Tension on the Spring

Before removing the broken spring, you need to release the tension on it. To do this, use a winding bar to turn the winding cone counterclockwise until the tension is released. Be sure to wear safety glasses to protect your eyes from any flying debris.

Step 4: Remove the Broken Spring

Once you’ve released the tension on the spring, use a pair of pliers to disconnect the safety cable from the spring. Then, use a wrench to loosen the bolts that hold the spring in place. Once the bolts are removed, carefully slide the spring off the torsion bar.

Step 5: Install the New Spring

If you need to replace the broken spring, now is the time to do it. Install the new spring onto the torsion bar, making sure that it’s centered and tightened securely with the bolts. Then, reattach the safety cable to the spring.

Step 6: Wind the Spring

Using the winding bar, turn the winding cone clockwise to wind the new spring. Wind it until the tension is the same as the other spring. Make sure that the spring is wound evenly to prevent it from snapping.

Step 7: Test the Garage Door

Once you’ve wound the new spring, test the garage door to ensure that it’s functioning correctly. Open and close the door a few times to ensure that the spring is working correctly.

Fixing a garage door spring can be a challenging task, but with the right tools and knowledge, you can do it yourself. However, it’s essential to follow safety precautions to prevent injuries. If you’re not comfortable fixing your garage door spring yourself, contact a professional garage door repair company in Layton UT to help you. Our team of professional technicians can help fix your garage door spring quickly and safely, ensuring that your garage door is functioning optimally. Contact us today to schedule garage door repair services.